IEEE802.11ac 5GHz and IEEE802.11bgn 2.4GHz High Power In-wall access point, In-Ceiling access point, Wireless Indoor AP, Total Solution Provider
IEEE802.11ac 5GHz, IEEE802.11bgn 2.4GHz, High Power, Wireless/wifi, In wall, In-wall access point, In-Ceiling AP, In-Ceiling access point, Indoor Wireless Access Point, Indoor AP, Taiwan, China, Manufacturers WAPD-101AC

IEEE802.11ac 5GHz and IEEE802.11bgn 2.4GHz High Power Ceiling / Wall-Mount Access Point W/ IEEE802.3at POE Built-in, and POE Pass-through (Can be AP Managed by WMS-308N) W/ 94V0 Flameproof rated

PheeNet WAPD-101AC IEEE802.11ac 5GHz 500mW and IEEE802.11bgn 2.4GHz 800mW High Power Ceiling or Wall-Mount Wireless AP with 10/100/1000 IEEE802.3at/af POE is designed to be mounted on the ceiling or wall. WAPD-101AC support 1 Port POE through to power on another POE Device (POE IP Camera, POE AP, etc.)
WAPD-101AC design for high density, high security next generation deployment in large offices, schools, hospital, luxury houses, hotels, etc. Built-in high gain antenna provides Omni directional coverage specifically designed for today’s open workspaces. A Multiple-pose mounting easily secures WAPD-101AC access point to ceilings and walls. For maximum concealment, the access point may be placed above ceilings or suspended ceilings.
WAPD-101AC is high power Access Point with enhanced receive sensitivity that reliably distributes multimedia content over the standard 802.11 wifi. WAPD-101AC integrates a long-range power amplifier and high sensitivity receiver to deliver unmatched reliability and performance at large coverage application, resulting in fewer required APs for a given deployment.
And, a network administrator can centrally manage the WAPD-101AC via a Web browser or an SNMP MIB browser or PheeNet’s Network Access Gateway / Controller WMS-308N. While integrating with Network Access Gateway / Controller WMS-308N, PheeNet WAPD-101AC is a best IEEE802.11ac 5GHz and IEEE802.11bgn 2.4GHz Indoor Ceiling / Wall-Mount Wireless AP for Public Wifi User Service Management in the Hotel, Hostel, Hospital, etc places.



General Features
  • A compact Ceiling / Wall-Mount AP
  • Supports standard IEEE802.3at/af POE, and one port POE pass-through for additional POE AP or IP Camera, etc. POE device
  • 2.4GHz , IEEE 802.11 b/g/n (800mW); Data Rate : up to 300Mbps for 40MHz channels ;
  • 5GHz, IEEE 802.11 a/n/ac (500mW); Data Rate: up to 867Mbps in 802.11ac 80MHz channels;  up to 300Mbps for 40 MHz channels
Access Point Feature
  • Number of ESSID : 8
  • Number of associated clients per AP : 32
  • Operation Mode : AP Mode 
  • Slot Time , ACK/CTS Timeout 
  • RSSI threshold support
  • TX burst support
  • Beacon interval: adjustable to best adapt to the deployment environment
  • IAPP : to facilitable faster roaming for the stations among different APs nearby
  • 802.11n protection : to let the transmission rate of associated 802.11g and 802.11b not to be affected with surrounding existence of 802.11b stations
  • RTS and fragmentation control
  • Adjustable transmission power : 9 Levels
  • Wireless site survey : for scanning the surrounding access points for connection
  • VLAN tag support  
Authentication/Encryption (Wireless Security)
  • Data encryption: WEP(64/128/152-bits) , WPA/WPA2 with TKIP or AES-CCMP
  • User Authentication : WEP, IEEE802.1X,WPA-PSK, WPA-Enterprise , MAC ACL
  • Setting for TKIP/CCMP/AES key’s refreshing period
  • Support IEEE802.11 mixed mode, open and shared key authentication
  • Hidden ESSID: broadcast SSID option can be turn off to prevent SSID broadcast to the public
  • Station Isolation setting : when enabled , all stations associated with this AP cannot communicate with each other
Quality of Service
  • DiffServ/TOS
  • IEEE802.11p/COS
  • IEEE 802.11Q Tag VLAN priority control
  • IEEE802.11e WMM
  • Web-Based management interface
  • Remote configuration and management
  • Remote firmware upgradeable
  • Software one-button-click to reset back to factory defaults
  • Utilities for system configuration backup and restoration
  • SNMP MIBII support (v2c/v3)
  • NTP time synchronization
  • DHCP client
  • Syslog client
  • Support Event log
  • Support statistics on total transmission encountered and transmitting error occurred
Central AP management supported while working with WMS-308N:
  • Auto discovery for managed APs
  • AP-Automatic configuration and provisioning
  • AP Profile Management
  • AP Batch Setup (IP address, Wireless Security, VAP, System Info / Password / Management  Method, Time Server, Channel / Output Power / Band / Country Code, Firmware update by
    TFTP or URL, etc.)
  • AP Group Setup (Dynamic Channel Allocation, Maximum Client Control, MAC Filter Control,MAP)
  • AP Group Status (IP address, FW version, Online user, RSSI, TX/RX bandwidth, Device Syslog)
Standard IEEE802.11ac
IEEE 802.11g
IEEE 802.11b
Frequency Band IEEE802.11b/g:
2.412 ~ 2.462GHz (USA)
2.412 ~ 2.484GHz (Japan)
2.412 ~ 2.472 GHz (Europe ETSI)
2.457 ~ 2.462 GHz (Spain)
2.457 ~ 2.472 GHz (France)
IEEE802.11 a/n/ac  :
5.150 – 5.350 & 5.725 – 5.825 GHz(USA)
4.900 – 5.250 GHz(Japan)
5.150 – 5.350 & 5.470 – 5.725GHz (Europe ETSI)
Modulation IEEE802.11b:DSSS (DBPK,DQPSK,CCK)
IEEE 802.11n:(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
Data Transfer Rate IEEE802.11b:1 / 2 / 5.5 / 11Mbps (auto sensing)
IEEE802.11g:6 / 9 / 12 / 18 / 24 / 36 / 48 / 54(auto sensing)
IEEE802.11n : 300Mbps (at 40MHz) , 150Mbps (at 20MHz)
IEEE802.11ac :867Mbps(at 80MHz)
Security WEP (64/128/152 Bit)
WPA2(PSK(AES+TKIP) / (802.1x , RADIUS)
802.1x (64/128 Bit)
User Isolation
Hidden SSID
MAC Address Filtering (MAC ACL)
IEEE802.11 mixed mode support open and shared key authentication
VLAN assignment on BSSID
Client to Client Isolation
AP to AP Isolation
Sensitivity -92dBm
Output Power 2.4GHz : 800mW
5GHz : 500mW
Antenna Built-in 5GHz 5dBi Pifa Antenna x 2, 2.4GHz 3dBi Pifa Antenna x 2
Channels 802.11b/g/n :
11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
EEE 802.11a/n/ac :
12 For FCC , 4 for Japan 4, 18 for Europe
Operating Mode AP Mode
Client Bridge Mode
WDS Mode
QOS IEEE 802.1p /COS
IEEE 801.11e WMM
IEEE 802.11D Spanning Tree
  • Two administrator accounts
  • CLI access (Remote Management ) via Telnet and SSH
  • Remote firmware upgrade (via Web HTTP Sever  / TFTP / Local )
  • Utilities to backup and restore the system configuration
  • Full Statistics and Status Reporting
  • Real time traffic monitor
  • Ping Watchdog 
  • Status monitoring of on-line users
  • Interface connection status
  • Support Syslog for diagnosing and troubleshooting
  • User traffic history logging
  • SNMP v1,v2c ,v3
  • SNMP Traps to a list of IP Address
  • Support MIB-II
  • NTP Time Synchronization
Base Platform QCA9557 +QCA9882+QCA8337
Clock Speed 720MHz
Reset Switch Built-in Push-button momentary contact switch
SDRAM On board : 64 Mbytes
Flash On board : 16 Mbytes
Interface 10/100/1000BASE-TX auto-negotiation Ethernet port x 2 (RJ-45 connector) ; Auto MDI/MDI-X
Support 48VDC IEEE 802.3at/af Active Power Over Ethernet X 1, Support POE Pass-through x 1
LED 1 x Power, 2 x LAN, 1 x Wireless 2.4G, 1 x Wireless 5GHz
Environment Operating Temperature:0~50℃
Storage Temperature:-20~60℃
Humidity: 5%~90%(non condensing)
Power Supply Power Over Ethernet (IEEE802.3at/af) or 12V/1A DC
System Power Consumption: 10W (Peak Power/Full Utilization)
(Option: 12V/1A DC Adapter)
Dimensions 158(W) x 158(L) x 37(H)(mm)
Weight 150g
Certificate FCC , CE