In-wall access point, In-Ceiling access point, Wireless Indoor AP, Total Solution Provider
Wireless/wifi, In wall, In-wall access point, In-Ceiling AP, In-Ceiling access point, Indoor Wireless Access Point, Indoor AP, Taiwan, China, Manufacturers WAP-3300NP

IEEE802.11bgn 2T2R 300Mbps High Power Ceiling / On-Wall Access  Point W/ IEEE802.3at POE Built-in (Can be AP Managed by WMS-308N) W/ 94V0 Flameproof rated

PheeNet WAP-3300NP IEEE802.11bgn 2T2R 300Mbps 800mW High Power Ceiling or Wall-Mount Wireless AP
with 10/100Mbps IEEE802.3at/af POE is designed to be mounted on the ceiling or wall.
 
WAP-3300NP design for high density, high security next generation deployment in large offices, schools, hospital,
luxury houses, hotels, etc. Built-in high gain antenna provides Omni directional coverage specifically designed for
today’s open workspaces. A Multiple-pose mounting easily secures WAP-3300NP access point to ceilings and
walls. For maximum concealment, the access point may be placed above ceilings or suspended ceilings.
 
WAP-3300NP is a 800mW high power Access Point with enhanced receive sensitivity that reliably distributes
multimedia content over the standard 802.11 wifi. WAP-3300NP integrates a long-range power amplifier and
high sensitivity receiver to deliver unmatched reliability and performance at large coverage application, resulting
in fewer required APs for a given deployment.
 
And, a network administrator can centrally manage the WAP-3300NP via a Web browser or an SNMP MIB or
PheeNet’s Network Access Gateway / WLAN Controller WMS-308N. While integrating with Network Access
Gateway / WLAN Controller WMS-308N, PheeNet WAP-3300NP is a best IEEE802.11bgn Indoor Ceiling /
Wall-Mount Wireless AP for Public Wifi User Service Management in the Hotel, Hostel, Hospital, etc places.
 
 
 
Application
 

 
 
Features
 
General Features
* A compact Ceiling / Wall-Mount AP
* Supports standard IEEE802.3at/af POE
* Invisible and could blend with all interior decoration
 
Access Point Feature 
* Number of ESSID : 8
* Number of associated clients per AP : 32
* Operation Mode : AP Mode 
* Slot Time , ACK/CTS Timeout 
* RSSI threshold support
* TX burst support
* Beacon interval: adjustable to best adapt to the deployment environment
* IAPP : to facilitable faster roaming for the stations among different APs nearby
* 802.11n protection : to let the transmission rate of associated 802.11g and 802.11b not to be affected with surrounding
   existence of 802.11b stations
* RTS and fragmentation control
* Adjustable transmission power : 9 Levels
* Wireless site survey : for scanning the surrounding access points for connection
* VLAN tag support  
 
Authentication/Encryption (Wireless Security) 
* Data encryption: WEP(64/128/152-bits) , WPA/WPA2 with TKIP or AES-CCMP
* User Authentication : WEP, IEEE802.1X,WPA-PSK, WPA-Enterprise , MAC ACL
* Setting for TKIP/CCMP/AES key’s refreshing period
* Support IEEE802.11 mixed mode, open and shared key authentication
* Hidden ESSID: broadcast SSID option can be turn off to prevent SSID broadcast to the public
* Station Isolation setting : when enabled , all stations associated with this AP cannot communicate with each other
 
Quality of Service 
* DiffServ/TOS
* IEEE802.11p/COS
* IEEE 802.11Q Tag VLAN priority control
* IEEE802.11e WMM
 
Management 
* Web-Based management interface
* Remote configuration and management
* Remote firmware upgradeable
* Software one-button-click to reset back to factory defaults
* Utilities for system configuration backup and restoration
* SNMP MIBII support (v2c/v3)
* NTP time synchronization
* DHCP client
* Syslog client
* Support Event log
* Support statistics on total transmission encountered and transmitting error occurred
 
 
Central AP management supported while working with WMS-308N:
* Auto discovery for managed APs
* AP-Automatic configuration and provisioning
* AP Profile Management
* AP Batch Setup (IP address, Wireless Security, VAP, System Info / Password / Management Method, Time Server, Channel /     Output Power / Band / Country Code, Firmware update by TFTP or URL, etc.)
* AP Group Setup (Dynamic Channel Allocation, Maximum Client Control, MAC Filter Control, MAP)
* AP Group Status (IP address, FW version, Online user, RSSI, TX/RX bandwidth, Device Syslog)
 
 

Specification
 
Wireless
Standard IEEE802.11n
IEEE 802.11g
IEEE 802.11b
Frequency Band 2.412 ~ 2.462GHz (USA)
2.412 ~ 2.484GHz (Japan)
2.412 ~ 2.472 GHz (Europe ETSI)
2.457 ~ 2.462 GHz (Spain)
2.457 ~ 2.472 GHz (France)
Modulation IEEE802.11b:DSSS (DBPK,DQPSK,CCK)
IEEE802.11g:OFDM(64-QAM,16-QAM,QPSK,BPSK)
IEEE 802.11n:(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
Security WEP (64/128/152 Bit)
WPA-PSK(AES+TKIP) / (802.1x , RADIUS)
WPA2(PSK(AES+TKIP) / (802.1x , RADIUS)
802.1x (64/128 Bit)
User Isolation
Hidden SSID
MAC Address Filtering (MAC ACL)
IEEE802.11 mixed mode support open and shared key authentication
VLAN assignment on BSSID
Client to Client Isolation
AP to AP Isolation
Sensitivity CCK 1M      -92 dBm +- 2
CCK 11M     -85 dBm +- 2
OFDM 6M    -88 dBm +- 2
OFDM 54M   -72 dBm +- 2
MCS0/8       -88 dBm +- 2
MCS1/9       -86 dBm +- 2
MCS2/10      -84 dBm +- 2
MCS3/11      -80 dBm +- 2
MCS4/12      -76dBm +- 2
MCS5/13      -74 dBm +- 2
MCS6/14      -72 dBm +- 2
MCS7/15      -70 dBm +- 2
Output Power CCK 1M,2M,5.5M,11M  28dBm +- 2
OFDM 6M~36M        26dBm +- 2
OFDM 48M            24dBm +- 2
OFDM 54M            23dBm +- 2
MCS0~3               26dBm +- 2
MCS4                 25dBm +- 2
MCS5                 24dBm +- 2
MCS6                 23dBm +- 2
MCS7                   22dBm +- 2
MCS8~11                29dBm +- 2
MCS12                  28dBm +- 2
MCS13                  27dBm +- 2
MCS14                  26dBm +- 2
MCS15                  25dBm +- 2
Antenna Built-in 2 x 2 4dBi PCB Antenna 
Channels 802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
Operating Mode AP Mode
Client Bridge+Universal Repeater Mode
QOS IEEE 802.1p /COS
IEEE 801.11e WMM
IEEE 802.11D Spanning Tree
Management -          Two administrator accounts
-          CLI access (Remote Management ) via Telnet and SSH
-          Remote firmware upgrade (via Web HTTP Sever  / TFTP / Local )
-          Utilities to backup and restore the system configuration
-          Full Statistics and Status Reporting
-          Real time traffic monitor
-          Ping Watchdog 
-          Status monitoring of on-line users
-          Interface connection status
-          Support Syslog for diagnosing and troubleshooting
-          User traffic history logging
-          SNMP v1,v2c ,v3
-          SNMP Traps to a list of IP Address
-          Support MIB-II
-          NTP Time Synchronization
 
Hardware
Base Platform Atheros 9341
Clock Speed 400MHz
Reset Switch Built-in Push-button momentary contact switch
SDRAM On board : 32 Mbytes
Flash On board : 8 Mbytes
Interface 10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector) ; Auto MDI/MDI-X
Support 48VDC IEEE 802.3at/af Active Power Over Ethernet X 1
LED 1x Power, 1xLAN, 1xWireless
Environment Operating Temperature:0~50℃
Storage Temperature:-20~60℃
Humidity: 5%~90%(non condensing)
Power Supply Power Over Ethernet (IEEE802.3at/af) or 12V/1A DC
System Power Consumption: 10W (Peak Power/Full Utilization)
(Option: 12V/1A DC Adapter)
Dimensions 120(W) x 120(L) x 32(H)(mm)
Weight 150g
Certificate FCC , CE
 
 
 

TOP