In-Ceiling access point,In-wall access point,Wireless Indoor AP,Total Solution Provider
 

Wireless Total Solutions for Telecom / ISP / WISP

Wireless Coverage Mesh / Wireless Hotspot Gateway

Wireless Mobile Live Video Surveillance Rescue

Wireless Backhaul

Wireless LAN & Accessory
Network Information Security Management for SMB / Enterprise / Hot Spot / School / Government

Network Security

Network Access Control

VoIP / IP PBX
简体中文

无线网桥 / 无线覆盖

网络认证计费网关

无线微波移动音视频监控传输系统
繁體中文

無線橋接器 / 無線覆蓋

無線熱點認證閘道器

無線微波移動音視頻監控傳輸系統

網路安全

 
 

 

 
 
 
 
>> Product > Wireless Coverage Mesh / Wireless Hotspot Gateway > In-Wall / In-Ceiling AP,Industrial Class Access Point > WAP-954NP-C
     
 

WAP-954NP-C  

IEEE802.11bgn High Power In-Ceiling Access Point W/ Giga IEEE802.3af POE Built-in

 

 

 
  PheeNet WAP-954NP-C IEEE802.11bgn High Power Indoor Wireless AP is designed to fit into the ceiling, and bring the benefits of both a RJ-45 wired connection as well as WiFi wireless connection.

The WAP-954NP-C can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective
wireless deployment. And, a network administrator can centrally manage the
WAP-954NP-C via a Web browser or an SNMP MIB browser. With included PoE, power and data are supplied to the unit using CAT5 Ethernet cable.

The WAP-954NP-C is ideal for institutions that are already wired for CAT5 and now need both
a wired connection as well as a wireless solution in each room. The WAP-954NP-C has an
RJ-45 connector on the front of the unit so a user will not lose their wired connection while
obtaining a wireless connection in each room.

The WAP-954NP-C is compliant with the latest wireless industrial security standards that are
required in those tightly secured enterprise network environments. Its Wireless Distribution
System (WDS) feature allows for flexible extension of wireless coverage.

WAP-954NP-C's easy-to-use web-based administrative interface make the configuration task and client management simple and straightforward. In addition, CLI and SNMP management interfaces are also supported by WAP-954NP-C.

The built-in software interfaces of WAP-954NP-C has allow for communicating with other types
of network management servers. When managed by backend controlling gateway,WAP-954NP-C can further provide enhanced values in a well managed WLAN solution.


Technique scope:
Wireless hotspot gateway, Wireless Gateway ,Hotspot Gateway, Visitor Access Gateway, Wireless coverage, Network access control, Indoor ap, in wall ap, in-wall access point, ceiling ap, Ceiling access point, Indoor Wireless Access Point, Secure WLAN Controller, Secure Wireless Office Controller, Enterprise Access Point, access point, managed access point, wireless AP, 802 11, Wireless Mesh Network, Wireless Mesh, Wireless network security,Wireless Management, AM Management WLAN Switch, Management Access Controller, Intelligent Device Server, Intelligent Wireless Switch, Internet Usage Monitor, Internet Monitor, Employee internet monitor, Unified Threat Management, SSL VPN, Firewall VPN, Network Security, Network Management Systems
 
     
   
   
       
   
 

General Features
•Supports Gigabit Ethernet port
•Supports standard IEEE802.3af POE
•Use existing Ethernet cabling system, no re-wiring
•Invisible and could blend with all interior decoration

Wireless Features
•IEEE802.11h Transmission Power Control
•Channel Selection: Manual or Auto
•No of BSSID (VAP): 4
•No. of max WDS setting: 6
•Preamble setting : Short/Long
•Setting for transmission speed
•Dynamic wireless re-transmission

System Administration
•Web-based management UI
•Remote firmware upgrade by Web GUI
•Console management
•Backup and restore the system configuration
•Support SNMP v2c, v3, MIBII
•SNMP Traps to a list of IP number
•Support Telnet, SSH, Command Line Interface (CLI)
•Remote Link Test-Display connect statistics

 
     
   
 

 Wireless

 
 

 Standard

IEEE802.11n
IEEE 802.11g
IEEE 802.11b
 
 

 Frequency Band

2.412 ~ 2.484GHz  
 

 Modulation

IEEE802.11b:DSSS (DBPK,DQPSK,CCK)
IEEE802.11g:OFDM(64-QAM,16-QAM,QPSK,BPSK)
IEEE 802.11n:(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
 
 

 Security

WEP (64/128/152 Bit)
WPA-PSK(AES+TKIP) / (802.1x , RADIUS)
WPA2(PSK(AES+TKIP) / (802.1x , RADIUS)
802.1x (64/128 Bit)
User Isolation
Hidden SSID
MAC Address Filtering (MAC ACL)
IEEE802.11 mixed mode support open and shared key authentication
VLAN assignment on BSSID
VLAN assign to Front LAN
VLAN pass through to Front LAN
Network Integrity
Client to Client Isolation
AP to AP Isolation
 
 

 Sensitivity

11b:
-90dBm@1Mbps, ±2dB
-88dBm@2Mbps, ±2dB
-86dBm@5.5Mbps , ±2dB
-83dBm@11Mbps, ±2dB
11g:
-86dBm@6Mbps, ±2dB -84dBm@9Mbps, ±2dB
-82dBm@12Mbps , ±2dB -80dBm@18Mbps, ±2dB
-78dBm@24Mbps, ±2dB -75dBm@36Mbps, ±2dB
-72dBm@48Mbps , ±2dB -70dBm@54Mbps, ±2dB
11n:
MCS HT20 HT40
0 -85dBm, ±2dB -83dBm, ±2dB
1 -83dBm, ±2dB -81dBm, ±2dB
2 -81dBm, ±2dB -79dBm, ±2dB
3 -80dBm, ±2dB -76dBm, ±2dB
4 -78dBm, ±2dB -72dBm, ±2dB
5 -74dBm, ±2dB -69dBm, ±2dB
6 -71dBm, ±2dB -65dBm, ±2dB
7 -67dBm, ±2dB -62dBm, ±2dB
8 -85dBm, ±2dB -83dBm, ±2dB
9 -83dBm, ±2dB -81dBm, ±2dB
10 -80dBm, ±2dB -78dBm, ±2dB
11 -78dBm, ±2dB -75dBm, ±2dB
12 -75dBm, ±2dB -71dBm, ±2dB
13 -71dBm, ±2dB -69dBm, ±2dB
14 -68dBm, ±2dB -64dBm, ±2dB
15 -65dBm, ±2dB -61dBm, ±2dB
 
 

 Antenna

Built-in 2dBi Omni Antenna  
 

 Output Power

802.11b – 26±1.5dBm
802.11g – 23±1.5dBm
802.11n – 22±1.5dBm (HT20)
802.11n – 20±1.5dBm (HT40)
 
 

 Transmit Power Control

Range 1-100  
 

 Channels

802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France  
 

 Operating Mode

AP Mode
WDS Mode (Bridge /Repeater)
AP Client Mode
 
 

 QOS

IEEE 802.1p /COS
IEEE 801.11e WMM
IEEE 802.11D Spanning Tree
 
 

 Management

Web-based administration
Firmware upgrade by Web GUI
Remote Link Test - Display connect statistics
SNMP Traps to a list of IP number(Option)
Event Log
Support DHCP Client
Support SNMP MIBII v2c/v3(Option)
Support Telnet(Option)
Command Line Interface (CLI) (Option)
NTP Time synchronization
Support Statistics on total transmission encountered and transmitting error occurred
 
 

 Hardware

 
 

 Base Platform

Ralink RT3052F  
 

 Clock Speed

384MHz  
 

 Reset Switch Built-in

Push-button momentary contact switch  
 

 SDRAM

On board : 16 Mbytes  
 

 Flash

On board : 4 Mbytes  
 

 Interface

WAN:
10/100/1000BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector) ; Auto MDI/MDI-X
Support 48VDC IEEE 802.3af Active Power Over Ethernet X 1
 
 

 LED

1x LAN, 1x WLAN  
 

 Environment

Operating Temperature:-20~50℃
Storage Temperature:-20~70℃
Humidity: 5%~90%(non condensing)
 
 

 Power Supply

Power Over Ethernet (48V/0.125 A)
System Power Consumption: 4.5W
 
 

 Dimensions

125mm diameter x 64mm depth  
 

 Weight

150g  
 

 Certificate

FCC , CE  
   

TOP